|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
1 2 TO-220 D2PAK 1 - Cathode 2 - Anode Back of Case - Cathode 1 2 1 2 APT15D30K 300V APT15D30SA 300V 15A 15A ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS * Anti-Parallel Diode * * * * * -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers PRODUCT FEATURES * Ultrafast Recovery Times * Soft Recovery Characteristics * Popular TO-220 Package * Low Forward Voltage * High Blocking Voltage * Low Leakage Current PRODUCT BENEFITS * Low Losses * Low Noise Switching * Cooler Operation * Higher Reliability Systems * Increased System Power Density MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings: TC = 25C unless otherwise specified. APT15D30K_SA UNIT 300 Volts Maximum Average Forward Current (TC = 117C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 15 34 110 -55 to 150 300 C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol IF = 15A VF Forward Voltage IF = 30A IF = 15A, TJ = 125C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 1.2 1.5 1.0 1.4 Volts VR = VR Rated, TJ = 125C 500 38 053-3010 Rev C pF 5-2004 VR = VR Rated 150 A DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Test Conditions MIN TYP APT15D30K_SA MAX UNIT ns nC Reverse Recovery Time I = 1A, di /dt = -100A/s, V = 30V, T = 25C F F R J Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 15A, diF/dt = -200A/s VR = 200V, TC = 125C IF = 15A, diF/dt = -200A/s VR = 200V, TC = 25C 16 32 46 3 80 230 6 42 460 19 - - Amps ns nC Amps ns nC Amps IF = 15A, diF/dt = -1000A/s VR = 200V, TC = 125C - THERMAL AND MECHANICAL CHARACTERISTICS Symbol RJC RJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT C/W oz g 1.35 80 0.07 1.9 10 1.1 Torque Maximum Mounting Torque lb*in N*m APT Reserves the right to change, without notice, the specifications and information contained herein. 1.4 , THERMAL IMPEDANCE (C/W) 1.2 1.0 0.8 0.9 0.7 0.5 0.6 0.4 0.2 0 0.3 Note: PDM t1 t2 0.1 0.05 10-5 10-4 Z SINGLE PULSE 10-3 10-2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2 JC 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (C) 0.725 C/W 0.00166 J/C 5-2004 Power (watts) 0.455 C/W 0.0381 J/C 053-3010 Rev C 0.172 C/W Case temperature (C) 0.645 J/C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 60 50 IF, FORWARD CURRENT (A) trr, REVERSE RECOVERY TIME (ns) 100 30A 80 15A 60 APT15D30K_SA TJ = 125C VR = 200V 40 30 20 TJ = 150C 10 0 TJ = 125C 0 7.5A 40 TJ = 25C TJ = -55C 20 0.05 1 1.5 2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage TJ = 125C VR = 200V 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/s) Figure 3. Reverse Recovery Time vs. Current Rate of Change 25 IRRM, REVERSE RECOVERY CURRENT (A) TJ = 125C VR = 200V 0 600 Qrr, REVERSE RECOVERY CHARGE (nC) 30A 500 400 300 200 100 0 30A 15A 20 15 15A 10 7.5A 5 7.5A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 trr Kf, DYNAMIC PARAMETERS (Normalized to 1000A/s) 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 5. Reverse Recovery Current vs. Current Rate of Change 40 35 30 IF(AV) (A) 0 Qrr 1.0 0.8 trr 0.6 Qrr 0.4 0.2 0.0 IRRM 25 20 15 10 5 Duty cycle = 0.5 TJ = 150C 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 6. Dynamic Parameters vs. Junction Temperature 300 CJ, JUNCTION CAPACITANCE (pF) 0 50 75 100 125 150 Case Temperature (C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 250 200 150 5-2004 100 50 0 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage .7 1 053-3010 Rev C APT15D30K_SA Vr +18V 0V D.U.T. 30H trr/Qrr Waveform diF /dt Adjust APT30M75BLL PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-220AB Package Outline 10.66 (.420) 9.66 (.380) TO-263 (D2) Surface mount Package outline Cathode (Heat Sink) 5.33 (.210) 4.83 (.190) 6.85 (.270) 5.85 (.230) 4.45 (.175) 4.57 (.180) 1.27 (.050) 1.32 (.052) 10.06 (.396) 10.31 (.406) 1.40 (.055) 1.65 (.065) 7.54 (.297) 7.68 (.303) 1.39 (.055) 0.51 (.020) Cathode 12.192 (.480) 9.912 (.390) 3.42 (.135) 2.54 (.100) 4.08 (.161) Dia. 3.54 (.139) 0.050 (.002) 0.330 (.013) 0.432 (.017) 8.51 (.335) 8.76 (.345) 6.02 (.237) 6.17 (.243) 5-2004 0.080 (2.032) MAX. 14.73 (.580) 12.70 (.500) 3.683 (.145) MAX. 0.000 (.000) 0.254 (.010) 2.62 (.103) 2.72 (.107) 1.22 (.048) 1.32 (.052) {3 Plcs.} 0.762 (.030) 0.864 (.034) {2 Plcs.} 2.54 (.100) BSC {2 Plcs.} 3.68 (.145) 6.27 (.247) (Base of Lead) 0.50 (.020) 0.41 (.016) 2.92 (.115) 2.04 (.080) 4.82 (.190) 3.56 (.140) Cathode Anode Heat Sink (Cathode) and Leads are Plated 053-3010 Rev C 1.01 (.040) 2-Plcs. .83 (.033) 5.33 (.210) 4.83 (.190) 1.77 (.070) 2-Plcs. 1.15 (.045) Anode Cathode Dimensions in Millimeters (Inches) Dimensions in Millimeters and (Inches) APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. |
Price & Availability of APT15D30SA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |